Si-Tec® Ceramic Shoes Increase Wear Life by 133%

Si-Tec® Ceramic Shoes Increase Wear Life by 133% Texas, USASandstone & River Rock2″ Minus”Shoe costs reduced by 60% with Si-Tec® Ceramics.” Canica 6500050121FE Si-Tec® Ceramic Shoes   Baseline: 5 shoe table with standard chrome shoes Table speed of 1300 RPM 125,000 Tons Annual Production Standard chrome wear life of 3 X 8 hour shifts Two sets […]

Design Improvements Reduce Wear Parts Cost per ton by 25%

Design Improvements Reduce Wear Parts Cost per ton by 25% Idaho, USARecycled Asphalt Product (RAP)8″ Minus “Production improved from 22,000 tons per set to 27,500 tons per set, a 25% increase” Crush Boss 41560033035FE27 Si-Tec® Ceramic Blow Bar Baseline: Horizontal impactor using four Spokane 003035FE27 Si-Tec® ceramic blow bars 250 Tons/Hour input Production of 22,000 tons […]

Production Tonnage Increased 111% Using Si-Tec® Technology

Production Tonnage Increased 111% Using Si-Tec® Technology Utah “Throughput increased from 97 tons per hour to 205 tons per hour.” Kolberg-Pioneer – 45000059311HS Si-Tec® Ceramic Anvils Baseline: 43”, 5 shoe table running at 1190 RPM Standard high chrome anvil ring Crushing produced high number of fines Recirculation rate of 40% Objective: Increase production per set of […]

Si-Tec® Ceramic Shoes Reduce Wear Part Cost 40%

Si-Tec® Ceramic Shoes Reduce Wear Part Cost 40% USAClay with high silica content “Si-Tec® shoe wear life provided 2.25x improvement” Cemco 960052611HS Ceramic Shoe   Baseline: Standard chrome four shoe table on Cemco 96 Standard chrome shoes last 4 shifts of 8 hours Shoe change outs take four hours with two staff Shoe cost per ton […]

Si-Tec® Ceramic Feed Disk Increases Shoe Wear Life by 41%

Si-Tec® Ceramic Feed Disk Increases Shoe Wear Life by 41% TN, USA2″ Minus Sand Stone “Feed disk wear life improved 35%, while shoe wear life improved by 41%, with an increase of 1,469 tons produced” Cemco 70337-7143HS Feed Disk337-7115HS Ceramic Shoe Baseline: 5 Shoe table using 337-7115HS Ceramic shoes 130 Tons per hour using a closed […]

Production Tonnage Increased by 28% Using Improved Si-Tec® Technology

Production Tonnage Increased by 28% Using ImprovedSi-Tec® Technology USA2.5″ Minus   “Throughput increased from 18,000 tons per set of shoes to 24,760 tons per set of shoes” Terex – Canica 2350 VSI Crusher0050113HS Si-Tec® Ceramic Shoe Baseline: 5 Shoe table running at 1085 RPM Feed of 550 TPH+ Feed size of 2.5″ minus (Frack Sand) Objective: Increase tons per […]